19
Jan
How boots are made?
Share:
1. The finished leather samples are made into tinplate or plastic leather molds for factories or processing shops that specialize in leather release. The cutting master will use one of these two kinds of leather molds to cut the material. Only responsible for the design and craftsmanship of the upper is out of the narrow sense.
2.Cutting material: The cutting master cuts the whole leather material with a knife according to the tinplate leather or plastic leather that has been placed. After a pair of shoes is cut, it looks like a small piece, not like a boot at all. In addition to opening the leather, the inside of the shoes, the distribution, etc. are all completed in this process.
3.Folded surface: After receiving the skin of the cutting part, splicing a small piece of skin with glue, and then use a wooden hammer or an iron hammer to tighten the splicing place as needed. When finished, the entire boot surface is almost a single piece.
4.Shovel leather: After receiving the folded product, in order to prepare the shoe upper on the boot sole, the joint part between the leather and the boot sole must be thinned with a shovel blade, so that the joint is more reliable and beautiful. This process is done by man-operated machines. Whether the whole pair of boots is easy to open later, this process is very important. Although the machine is operated by a human, the quality of the product is determined by the human's operating technology and skilled procedures.
5.Car surface: put the folded surface, the small pieces of the boots into one piece. The surface of the car is also a very critical process. Whether the car is beautiful, the parking space and the needle position are in place, which determines the beauty and durability of the boots.
6.Fierce boots: put the car's boot leather on the boot last, and then use shoe nails to nail the edge of the boot leather to fix it on the boot last. The shape of the upper is generally determined by this process. Whether it is smooth, whether it is straight after wearing it, and whether it is crooked or not is often determined by this process.
7.Bottom fall: Fix the good upper, together with the shoe last, on the bottom of Xu boots, then wash the place where the boot bottom is to be bonded to the leather with cleaning solution, dry it, and then fix it with glue.
8.Forming: Put the boots with good soles on the molding machine, so that the glue can better stick to the bottom, and then the leather will be more stable and not deformed after molding. Spray paint: Many boots need to be painted. After painting, especially the black will be more beautiful, deeper and darker.
9.Drying: Put the leather shoes after painting into the oven for drying. Generally, the drying equipment is a strong light, just like the Yuba used for washing and drying, but there are many. There is also a heating wire for drying, but the heat dissipation of the heating wire is uneven, and the heat absorption efficiency of the boot is not high.
10.Polishing: This is the most critical process in the back of the boot. The polishing process determines whether the color of the shoe meets the customer's requirements. Polishing is divided into polishing and scorching, waxing and other treatments are all in the polishing process.
11.Laser: The leather and shoes of many boots need to be engraved with some patterns, or trademarks, patterns, etc., and the laser burns up to look very high-end.
12.Typing: It is to use gold paper or tin foil on the foot pad or the inner waist of the boot, use a heating machine, install a pattern or text mold, and press the gold or bank on the foot pad or inner waist after heating.
13.Packaging: In fact, it is also very important, because the boots have already been formed. It is necessary to ensure that the shape of the boots remains as original as possible after leaving the factory, and the boots must be kept from damp and mildew. These rely on packaging. The most important process of packaging is to use the toe paper to be specially folded into a special O shape, and then stuffed into the boot to ensure that the boot does not deform. The boot toe paper is composed of single-copy or double-copy paper on the outside of the toe paper. The toe paper inside has the function of forming and absorbing moisture. Then put it into the boot box or various accessories to make a good pair of boots. It is important to grasp every step and detail.
2.Cutting material: The cutting master cuts the whole leather material with a knife according to the tinplate leather or plastic leather that has been placed. After a pair of shoes is cut, it looks like a small piece, not like a boot at all. In addition to opening the leather, the inside of the shoes, the distribution, etc. are all completed in this process.
3.Folded surface: After receiving the skin of the cutting part, splicing a small piece of skin with glue, and then use a wooden hammer or an iron hammer to tighten the splicing place as needed. When finished, the entire boot surface is almost a single piece.
4.Shovel leather: After receiving the folded product, in order to prepare the shoe upper on the boot sole, the joint part between the leather and the boot sole must be thinned with a shovel blade, so that the joint is more reliable and beautiful. This process is done by man-operated machines. Whether the whole pair of boots is easy to open later, this process is very important. Although the machine is operated by a human, the quality of the product is determined by the human's operating technology and skilled procedures.
5.Car surface: put the folded surface, the small pieces of the boots into one piece. The surface of the car is also a very critical process. Whether the car is beautiful, the parking space and the needle position are in place, which determines the beauty and durability of the boots.
6.Fierce boots: put the car's boot leather on the boot last, and then use shoe nails to nail the edge of the boot leather to fix it on the boot last. The shape of the upper is generally determined by this process. Whether it is smooth, whether it is straight after wearing it, and whether it is crooked or not is often determined by this process.
7.Bottom fall: Fix the good upper, together with the shoe last, on the bottom of Xu boots, then wash the place where the boot bottom is to be bonded to the leather with cleaning solution, dry it, and then fix it with glue.
8.Forming: Put the boots with good soles on the molding machine, so that the glue can better stick to the bottom, and then the leather will be more stable and not deformed after molding. Spray paint: Many boots need to be painted. After painting, especially the black will be more beautiful, deeper and darker.
9.Drying: Put the leather shoes after painting into the oven for drying. Generally, the drying equipment is a strong light, just like the Yuba used for washing and drying, but there are many. There is also a heating wire for drying, but the heat dissipation of the heating wire is uneven, and the heat absorption efficiency of the boot is not high.
10.Polishing: This is the most critical process in the back of the boot. The polishing process determines whether the color of the shoe meets the customer's requirements. Polishing is divided into polishing and scorching, waxing and other treatments are all in the polishing process.
11.Laser: The leather and shoes of many boots need to be engraved with some patterns, or trademarks, patterns, etc., and the laser burns up to look very high-end.
12.Typing: It is to use gold paper or tin foil on the foot pad or the inner waist of the boot, use a heating machine, install a pattern or text mold, and press the gold or bank on the foot pad or inner waist after heating.
13.Packaging: In fact, it is also very important, because the boots have already been formed. It is necessary to ensure that the shape of the boots remains as original as possible after leaving the factory, and the boots must be kept from damp and mildew. These rely on packaging. The most important process of packaging is to use the toe paper to be specially folded into a special O shape, and then stuffed into the boot to ensure that the boot does not deform. The boot toe paper is composed of single-copy or double-copy paper on the outside of the toe paper. The toe paper inside has the function of forming and absorbing moisture. Then put it into the boot box or various accessories to make a good pair of boots. It is important to grasp every step and detail.
